- Sampler & vocoder
- Adding samples via Wooveconnect
- Levels, VU Metering & monitoring
- Sampling sounds from the audio input
- Skip-back sampling (resampling)
- Vocoder
- Working with slices
- Auto-slicing
- Real-time pitch and time warping
- Amen chop tutorial
- Multi-sampled instruments and percussion
- Using the two sample banks
- Using samples and kits in your songs
- Using single-cycle AKWF samples
- Using Amiga Tracker samples
- Using Teenage Engineering OP-1 / OP-Z sample kits
- Kit and/or master sample initialization
- Backing up sample kits
- Auto-space reclaimer
- Limitations
- Amen chop tutorial
- Auto-slice with full playthrough
Auto-slice with full playthrough
Select Auto-slice with full play through from the context menu
Your Woovebox has three different auto-slicing modes. The one we will be using is "auto slice with full playthrough".
You will end up with sixteen roughly evenly spaced slices that play through until then of the master sample.
This slicer mode will chop up the chosen (e.g. slow-blinking) slice into sixteen, roughly even parts that play through to the end of the master sample, rather than play up until where the next slice starts.
You can of course always change the start and end-points of your slices manually if you so wish.
You may also be interested in...
- Good Ol' Days Song SYX (under Example songs and patches .SYX files)
- 9. AU.Wv Auto-Pan LFO waveform (under Panning page)
Waveform for Auto-Pan LFO: Noise, Sine, Triangle, Saw, Square.
- 13. L2.Wv LFO 2 Waveform (under Amplitude page)
'SinE'; sine wave (starts at 0 / 90 degree phase, ramping up).
- 8. L.1.ho hold duration for cutoff frequency LFO (under Amplitude page)
Specifies the hold duration in milliseconds for which the LFO should hold the LFO's sampled value.
- Context menu (under Amplitude page)
'Copy 2to1'; copies all oscillator 2 AEG settings (including depth) to oscillator 1's AEG.
- Sampler & vocoder
- Adding samples via Wooveconnect
- Levels, VU Metering & monitoring
- Sampling sounds from the audio input
- Skip-back sampling (resampling)
- Vocoder
- Working with slices
- Auto-slicing
- Real-time pitch and time warping
- Amen chop tutorial
- Multi-sampled instruments and percussion
- Using the two sample banks
- Using samples and kits in your songs
- Using single-cycle AKWF samples
- Using Amiga Tracker samples
- Using Teenage Engineering OP-1 / OP-Z sample kits
- Kit and/or master sample initialization
- Backing up sample kits
- Auto-space reclaimer
- Limitations