You may also be interested in...

• 2. LEvL oscillator output level (under Osc1 and Osc2 oscillator page)
• Using the two sample banks (under Sampler & vocoder)

  Use SM.bK/SMPL banK/14/A6 on a song's GLob page to switch between bank 1 and bank 2.

• 4/Ar + value Factory reset (under Boot modes)
• 3/Ld + value Delete all samples (under Boot modes)

  Please note that the following procedure will cause all sample data on the device to be lost!

• 6/Sn Increase capacitive button sensitivity (under Boot modes)

  By keeping 6/Sn pressed while turning the device on, sensitivity of the capacitive buttons can be temporarily increased.