Boot up

After booting up, you will be dropped into Song mode.

Turn on your Woovebox without touching the write or play touch buttons (as their sensitivity is calibrated during power-on). Waking up the device takes up approximately two seconds. If you performed a firmware update, or if you performed a factory reset, this may take up to 2 minutes.

Once your Woovebox has booted up, you will be dropped into Song ("SG") mode. The song number you last worked on, is automatically restored. Or, if this is a factory reset unit, song 01 ("SG.01") is selected by default). The chord (Cd) track will play a chord/chime, to let you know boot up has completed. It also gives you an audible identifier of the song that is loaded (as you may recognize the timbre of the instrument).

Note that, when you switch away from Song mode, you can return to Song mode at any time, by holding the value button down and then short-pressing (meaning, holding down for less than one second) 16/A8/SONG.

If you accidentally scrolled past the "GLob" or "EFct" pages and the display reads "Fr.xx" (fragment number xx) or "DJ.xx" (DJ FX for fragment xx), you can use the value knob (turn left) to scroll back to to the "SG.xx", "GLob" (or Efct) page.