- Guides, tutorials and docs
- Learning the Woovebox
- The very basics
- Quick start tutorial and video
- Tempo and BPM
- Tracks
- Patterns
- Live pattern recording
- Conditional triggering and modification
- Chords
- Arpeggios
- Scales and modes
- Genres
- Patches and Presets
- Sound design
- Paraphonic parts
- Multi-instrument mode
- Risers, fallers, sweeps & ear candy
- Live mode
- Song mode
- Full song writing
- Sampler & vocoder
- Sidechaining, gating, ducking and compression
- Mastering
- Lo-fi & vintage analog and digital emulation
- Randomization
- Hall effect sensor playing
- Advanced techniques
- Undo
- Boot modes
- MIDI, Sync and connecting other gear
- Remote control expander mode
- Wireless MIDI
- Battery and charging
- Hardware quirks and limitations
- Understanding DSP load
- Looking after your Woovebox
- Firmware updates
Boot up

Turn on your Woovebox without touching the write or play touch buttons (as their sensitivity is calibrated during power-on). Waking up the device takes up approximately two seconds. If you performed a firmware update, or if you performed a factory reset, this may take up to 2 minutes.
Once your Woovebox has booted up, you will be dropped into Song ("SG") mode in song 01. The chord (Cd) track will play a note, to let you know boot up has completed and to give you an audible identifier of the song that is loaded (as you may recognize the timbre of the instrument).
Note that you can return to Song mode at any time, by holding the value button down and then short-pressing (meaning, holding down for less than one second) 16/A8/SONG.
You may also be interested in...
- Model comparison
- Hardware quirks and limitations (under Guides, tutorials and docs)
The USB-C port on your Woovebox is used for charging only.
- MIDI, Sync and connecting other gear (under Guides, tutorials and docs)
Lastly, it can turn any cheap controller or keyboard into an advanced workstation via remote control expander mode.
- 9/A1 Switch MIDI port to MIDI IN (under Boot modes)
- Songs (under The very basics)
To select a song to work on, hold play and press 1-16 to select Song 1-16.
- Guides, tutorials and docs
- Learning the Woovebox
- The very basics
- Quick start tutorial and video
- Tempo and BPM
- Tracks
- Patterns
- Live pattern recording
- Conditional triggering and modification
- Chords
- Arpeggios
- Scales and modes
- Genres
- Patches and Presets
- Sound design
- Paraphonic parts
- Multi-instrument mode
- Risers, fallers, sweeps & ear candy
- Live mode
- Song mode
- Full song writing
- Sampler & vocoder
- Sidechaining, gating, ducking and compression
- Mastering
- Lo-fi & vintage analog and digital emulation
- Randomization
- Hall effect sensor playing
- Advanced techniques
- Undo
- Boot modes
- MIDI, Sync and connecting other gear
- Remote control expander mode
- Wireless MIDI
- Battery and charging
- Hardware quirks and limitations
- Understanding DSP load
- Looking after your Woovebox
- Firmware updates