Using a single sample chromatically

You can use any kit's slice 1-16 chromatically. In other words, you can use any kit's slice as a custom oscillator wave type.

Perform the same "Pach Kit" shortcut as you would use for a sample kit, e.g.;

• In the sampler, select the kit you want to use ("US.01"-"US.16").
• Select and action the "Pach Kit" item in the context menu.
• Your Woovebox will report "Copy OK"; it will have created and copied a sample kit patch for your selected kit into the patch buffer (the same buffer you use to copy and paste patches).
• Exit the sampler by selecting the track to work on (value + 2/bS - 16/A8) where you want the sample kit to go. For your convenience, that track's "Pach" page will be selected by default already.
• Select and action the paste patch ("PStE Pach") context menu item to paste the patch (with our sample kit already set up) from the buffer into the track.

Next, make the following modifications;

• Set the track's behavior (7/hh/bEhv on the track's GLob pgae) to sample ('SMPL') instead of sample kit ('SMPK').
• Set the track's algorithm (3/Ld/Algo on the track's GLob page) to subtractive ('Subt') instead of warp.
• On both the Osc1 and Osc2 pages select the sample slice you wish to use under 15/A7/SL.SL for each oscillator (you can also just use one oscillator and set the level of the other oscillator to 0).