- Sampler & vocoder
- Adding samples via Wooveconnect
- Levels, VU Metering & monitoring
- Sampling sounds from the audio input
- Skip-back sampling (resampling)
- Vocoder
- Working with slices
- Auto-slicing
- Real-time pitch and time warping
- Amen chop tutorial
- Multi-sampled instruments and percussion
- Using the two sample banks
- Using samples and kits in your songs
- Using single-cycle AKWF samples
- Using Amiga Tracker samples
- Using Teenage Engineering OP-1 / OP-Z sample kits
- Kit and/or master sample initialization
- Backing up sample kits
- Auto-space reclaimer
- Limitations
- Sampler & vocoder
- Using Teenage Engineering OP-1 / OP-Z sample kits
Using Teenage Engineering OP-1 / OP-Z sample kits
Your Woovebox is partially compatible with Teenage Engineering OP-1 / OP-Z sample kit (aka "drum kit") AIFF files. Such kits can be found from different sources such as the OP1.FUN website, the SoundPacks.com website and others.
It follows that your Woovebox is also compatible with the output of OP-1/OP-Z software like the OP-1 Drum Utility by Xfer Records., as well as the on-line drum patch builder at OP1.FUN.
Please note, however, that only the first sixteen samples (out of a possible 24) from a kit will be available on your Woovebox. This means that the last eight samples - if present in the kit - will not be available once uploaded to your Woovebox.
"Teenage Engineering" and "OP-1" are registered trademarks of Teenage Engineering AB, and Pocket Animal Audio is not associated with or endorsed by Teenage Engineering.
You may also be interested in...
- iOS (under Pairing your Woovebox)
Please note that you may need to configure your iOS device to not turn off the screen during long SysEx transfers.
- Wireless MIDI (under Guides, tutorials and docs)
Your Woovebox supports MIDI in and out over BLE, allowing it to communicate with your DAW as well as the Wooveconnect service.
- Spectral resolution optimizer (under Understanding DSP load)
'FuLL'; forces full spectral resolution allocation for the track, preventing loss of resolution at all times.
- 3. n.V.St Noise Volume Start (under DJ page)
- Hardware quirks and limitations (under Guides, tutorials and docs)
The USB-C port on your Woovebox is used for charging only.
- Sampler & vocoder
- Adding samples via Wooveconnect
- Levels, VU Metering & monitoring
- Sampling sounds from the audio input
- Skip-back sampling (resampling)
- Vocoder
- Working with slices
- Auto-slicing
- Real-time pitch and time warping
- Amen chop tutorial
- Multi-sampled instruments and percussion
- Using the two sample banks
- Using samples and kits in your songs
- Using single-cycle AKWF samples
- Using Amiga Tracker samples
- Using Teenage Engineering OP-1 / OP-Z sample kits
- Kit and/or master sample initialization
- Backing up sample kits
- Auto-space reclaimer
- Limitations