- Dynamics
- S.Lvl
4. S.Lvl Send Level
The volume/strength (0-127) of the signal generated from this track that should be sent to the send bus ('S.buS').
You may also be interested in...
- Terms, Conditions and Warranty (under Shop)
- 7. FL.St Filter Start (under DJ page)
- MIDI Real-Time messages and clock sync (under MIDI, Sync and connecting other gear)
Your Woovebox outputs real-time clock/sync, start and stop messages.
- 5/Ki Boosted screen brightness / LED test / firmware version (under Boot modes)
The device will display the firmware version it is running, until the boot sequence is complete.
- 6/Sn Increase capacitive button sensitivity (under Boot modes)
By keeping 6/Sn pressed while turning the device on, sensitivity of the capacitive buttons can be temporarily increased.