1. bPM song tempo
Song's global tempo in beats per minute (range 80-260). Many time- or tempo-based settings and parameters derive their tempo from this one setting.
Note that BPM settings below 80 will reduce the available options for tempo-synced delay lengths. Delay lengths for the delay units (under 1/Cd and 5/Ki on the Song's effect "EFct" page) will be automatically adjusted down to accommodate very slow BPMs (and therefore very long delays).
You may also be interested in...
- Launch Wooveconnect
Manage songs, samples, audio stems, firmware updates and more through Wooveconnect.
- 3. n.V.St Noise Volume Start (under DJ page)
- Using the two sample banks (under Sampler & vocoder)
Use SM.bK/SMPL banK/14/A6 on a song's GLob page to switch between bank 1 and bank 2.
- 3/Ld + value Delete all samples (under Boot modes)
Please note that the following procedure will cause all sample data on the device to be lost!
- 2/bS + value Recovery mode (under Boot modes)
To do so, hold the 2/bS key and value knob pressed in while powering up the device.