Wireless MIDI over Bluetooth

Your Woovebox supports MIDI in and out over Bluetooth Low Energy, allowing it to communicate with your DAW as well as the Wooveconnect service.

To start your Woovebox with BLE enabled, keep the 1/Cd (or 2/bS for enhanced compatibility mode, or 3/Ld for high-speed mode) key pressed while switching on the device. The display reads 'boot bLE' (or 'safE BLE' or 'FaSt BLE').

Once your device has booted up, you can proceed to pair your Woovebox with another device, and use the Wireless MIDI and data transfer capabilities.

Please remember that your Woovebox can only connect to one device at a time; if you need to connect to a device, please make sure your Woovebox is disconnected from any other device first.

Pairing your Woovebox

After the pairing procedure for your particular operating system, your Woovebox can be used as a regular MIDI device within other applications, or can be managed through the Wooveconnect app.

Your host device's BLE radio needs to be BLE 4.0 compatible, and please make sure that your Woovebox is not already accidentally connected to some other device; it can only handle one connection at a time and will not be visible to any other devices while it is already connected.

Please make sure any Battery Saver mode that may interfere with Bluetooth is off (Android, iOS, and Windows Power Management).

The stability of your MIDI over BLE connection is heavily dependent the quality of the drivers and quality operating system's Bluetooth stack. Unfortunately this quality can be found lacking on various hardware/OS combinations from Microsoft, Google and Apple. If you require a rock solid plug & play MIDI over BLE solution that works on any machine, we recommend the WIDI Bud Pro solution by CME.