micro music workstation
powerful pocket groovebox, synthesizer, sequencer, sampler, expander, drum machine
Make more music with less
The Woovebox is a powerful, ultra-compact, music workstation/groovebox, for fast digital music production, anywhere.
Synthesizer Sequencer Sampler
Synthesizer
16 part multi-timbral (1 x 5-voice polyphonic track + 15 x 4-voice paraphonic or mono tracks)*
full-control single grand unified engine with 17 versatile synthesis algorithms
17 low-aliasing oscillator models + up to 256 user-define oscillators/samples
Virtual Analog, FM, Super Saw, AM, RingMod, x0x percussion, time warp, more
2 oscillator models + 1 sine super/sub-oscillator per voice
1 multi-mode filter per voice (16 filter types)
2 x AEG, FEG, multiple LFOs per voice
170+ patch presets
global multi-FX; reverb, stereo chorus / phaser, 2 x stereo delay
per-voice FX; clip or wave fold distortion, saturation, pre/post bit crushing, resampling, global multi-FX sends
per-voice dynamics; compressor/limiter, 4-bus side-chaining, gating
master compressor/limiter, vinyl and noise effects
special attention for emulating vintage digital, analog and organic sounds
extensive, complex sound design capabilities with 100+ parameters per timbre
intelligent patch randomization for infinite patch variations
DJ effects (noise, drone, HP/LP filter, buffered audio, stutter)
2 x "DJ FX" dynamic resampling loop buffer @ 44.1kHz 16-bit stereo
can be used as 16-part sound moduleSequencer
16 songs x 16 tracks x 16 patterns x 16 steps
fast workflow; create new intricate song ideas in minutes
polyrhythms, generative, arpeggio and x0x-style patterns
per-step conditionals, 100+ step modifier types, probabilities
content-aware intelligent pattern and chain randomization
use scales, modes, chord types and inversions, w/o music theory
fast diatonic playing/programming mode
chord recognition from external MIDI connected gear
pattern chaining, pattern muting conditions
micro-timing, swing and groove control
live punch & dub recording with optional quantization
song mode with per-fragment transformation, automation, programmable DJ FX / looper
send sync and MIDI to control connected gear (CC, patch changes, banks, etc.)
export songs, dry & wet stems as .WAV and .MID files for use in DAW / hybrid workflow
undo functionalitySampler
2m4s total across 2 banks @ 44.1kHz 8-bit mu-law (~12-bit effective) / 22.05kHz 16-bit**
reconstructive up-sampling to 44.1kHz 16-bit
512 total samples: 2 x banks x 16 user kits x 16 slices
dedicated 3.5mm line-input with optional direct mic-level sampling***
vocoder; imprint voice on audio
skip-back "always recording" sampling of past audio
digital sample import via MIDI connection
compatible with Teenage Engineering OP-1 / OP-Z drum kits****
real-time time stretching and pitch shifting
auto-slicing, manual slice, chop, re-arrange samples
add new oscillators, one-shots and loops
multi-sampled instrument support
random multi-sample variation triggering
use live audio as an oscillator model
re-sample internal synthesizer
automatic space management and optimization
undo functionality* polyphony restrictions may apply depending on DSP resources
** one of two 1m2s sample bank may be used per song
*** direct mic-level sampling only recommended for recording basic voice samples and vocoder input
**** first 16 samples only, "Teenage Engineering" and "OP-1" are registered trademarks of Teenage Engineering ABPocketable Connectable Playable
Pocketable
66 g / 2.4 oz (SE) 69g / 2.5 oz (Pro)
73mm/2.9"(W) x 77mm/3"(L) x 9mm/0.35"(H slab) 31mm/1.22"(H slab+knob)
USB-C rechargeable 1000/1200mAh (SE/Pro) internal battery
9h+/10.5h+ (SE/Pro) battery life continuous play, 100% DSP usage, wireless off
physical on/off switch
sturdy ABS-plastic enclosure with textured back
protective case includedConnectable
3.5mm stereo audio-out with sync pulse out via breakout cable (cable included with Pro)
3.5mm stereo audio-in for sampling*, effects and live mix of external gear
3.5mm type-A MIDI in/out**
USB-C port (charging-only)***
Wireless MIDI in/out over Bluetooth® LE
Wooveconnect 2 web interface****; song/sample transfer, WAV export, firmware update
expander mode; turn any MIDI-capable keyboard or controller into an workstation & synthPlayable
live mode with 16 triggerable scenes, programmable automation and re-triggering effects
mute and unmute tracks on the fly
16 tactile micro switches for live playing and improvisation
hall sensor for touchless note accenting, tremolo, vibrato and filter effects while playing
unique dynamic key-mapping for live melody improvisation
process 2 channels of audio-in as part of your song or live performance
integrate external audio into synthesis engine
endless live sound mangling possibilities and rhythmic effects* sampling in mono, mic-level capable for close-up voice & vocoder only
** switchable between either MIDI in or MIDI out (but not both), 3.5mm Type A TRS to DIN cable included with Pro
*** USB-C charger or charging cable not included
**** requires MIDI connection + WebMIDI enabled browser (e.g. not compatible with any iOS browser)OG 2023
- Firmware 2.0 compatible
- 3.5mm MIDI OUT
- 1000mAh battery (9h+)
- 68 g / 2.4 oz
- SLA 3D printed enclosure
- Sync OUT breakout cable
Ultimate value
- Firmware 2.0
- 3.5mm MIDI IN/OUT switchable
- 1000mAh battery (9h+)
- 66 g / 2.4 oz
- Injection moulded ABS enclosure + laser marking
Swiss army knife
- Firmware 2.0
- 3.5mm MIDI IN/OUT switchable
- 1200mAh battery (10h30m+)
- 69 g / 2.5 oz
- Injection moulded ABS enclosure + laser marking
- Sync OUT breakout cable
- Stereo to 2x mono splitter cable
- 3.5mm MIDI Type A to female DIN cable
- Voice/vocoder microphone
- Expander sticker sheets x2