15. SL.SL Slice Select
Slice select specifies which sample slice should be selected when a note is played.
- '1-16'; slice is determined by the 'SLcE' parameter specified by a step. Slices 1-16 are auditioned by pressing key 1-16.
- '1-16.'; slice is determined by the 'SLcE' parameter specified by a step. Slices 1-16 are auditioned by pressing key 1-16. Slice 1-8 and 9-16 have swapped locations.
- 'MSM1'; multi-sample slice select mode 1. This mode chooses the slice whose pitch is closest to the target pitch. This mode will result in the most natural sounding multi-sampled instrument playback. See also using a multi-sampled instrument.
- 'MSM2'; multi-sample slice select mode 2. This mode chooses the slice whose pitch is closest to the target pitch, but only if that sample was recorded at a higher pitch. This mode will result in multi-sampled instrument that is mostly free of aliasing. See also using a multi-sampled instrument.
- 'Sl 1'-'Sl16'; use a fixed slice (1 through 16) for every note.
You may also be interested in...
- Synthesizer | Sequencer | Sampler
- 2. L2.Md LFO 2 Mode (under Pitch page)
Chrd ("chord"); quantization is performed to the pitch of the nearest playing chord note.
- Remote control expander mode (under Guides, tutorials and docs)
The display of your Woovebox will brighten while the mode is active as a visual indicator.
- Advanced (under How to approach)
More than any other groovebox, the entire workflow centers around (and works towards) Song mode.
- Workflow and Song Mode (under The very basics)
Generally, a workflow will look like; Select a song to work on.