You may also be interested in...

• Example (under Inversions)
• Mapping (under Remote control expander mode)
• 3/Ld + value Delete all samples (under Boot modes)

  Please note that the following procedure will cause all sample data on the device to be lost!

• 6/Sn Increase capacitive button sensitivity (under Boot modes)

  By keeping 6/Sn pressed while turning the device on, sensitivity of the capacitive buttons can be temporarily increased.

• 5/Ki Boosted screen brightness / LED test / firmware version (under Boot modes)

  The device will display the firmware version it is running, until the boot sequence is complete.