- Sound design
- Architecture
- Oscillators
- Algorithms
- Low Frequency Oscillators (LFOs)
- Envelope generators
- Filters
- Amplitude modulation
- Pitch modulation
- Panning & EQ
- Dynamics, Sidechaining, Gating, Ducking, Compression and Transient Shaping
- Distortion, Saturation, Bit-crushing
- Global Send Multi-effects
- DJ FX
- Wavetable Synthesis
- A word about authenticity
- Pitch page
- Prt.S Portamento Speed
5. Prt.S Portamento Speed
Specifies how quick portamento should move from one pitch to another. The speed is expressed in step durations (e.g. the speed is dependent on your song's BPM). A value of "Off" will turn off portamento.
Please note that, in order to enable portamento, both a non-"off" speed and a non-0 probability must be set.
You may also be interested in...
- Terms, Conditions and Warranty (under Shop)
- 8. FL.En Filter End (under DJ page)
- Using the two sample banks (under Sampler & vocoder)
Use SM.bK/SMPL banK/14/A6 on a song's GLob page to switch between bank 1 and bank 2.
- MIDI Real-Time messages and clock sync (under Connecting other gear; MIDI, Sync, and audio pass-through)
Your Woovebox outputs real-time clock/sync, start and stop messages.
- 5/Ki Boosted screen brightness / LED test / firmware version (under Boot modes)
The device will display the firmware version it is running, until the boot sequence is complete.
- Sound design
- Architecture
- Oscillators
- Algorithms
- Low Frequency Oscillators (LFOs)
- Envelope generators
- Filters
- Amplitude modulation
- Pitch modulation
- Panning & EQ
- Dynamics, Sidechaining, Gating, Ducking, Compression and Transient Shaping
- Distortion, Saturation, Bit-crushing
- Global Send Multi-effects
- DJ FX
- Wavetable Synthesis
- A word about authenticity