- Sound design
- Architecture
- Oscillators
- Algorithms
- Low Frequency Oscillators (LFOs)
- Envelope generators
- Filters
- Amplitude modulation
- Pitch modulation
- Panning & EQ
- Dynamics, Sidechaining, Gating, Ducking, Compression and Transient Shaping
- Distortion, Saturation, Bit-crushing
- Global Send Multi-effects
- DJ FX
- Wavetable Synthesis
- A word about authenticity
You may also be interested in...
- Method 2 (under Arpeggios)
If a sine wave is configured for the Pitch LFO with a depth of 2.0, the pitch will sweep the chord's note over two octaves.
- Set output volume (under Quick start tutorial)
You can adjust the output volume like this anywhere in the interface.
- 14. Start Position LFO depth (under Panning & EQ page)
- The Woovebox song writing recipe (under Full song writing)
These individual patterns on individual tracks are then served together as song fragments in Song mode.
- 15. L.C.rt rate for cutoff frequency LFO (under Filter page)
Specifies the speed by which the LFO should oscillate.
- Sound design
- Architecture
- Oscillators
- Algorithms
- Low Frequency Oscillators (LFOs)
- Envelope generators
- Filters
- Amplitude modulation
- Pitch modulation
- Panning & EQ
- Dynamics, Sidechaining, Gating, Ducking, Compression and Transient Shaping
- Distortion, Saturation, Bit-crushing
- Global Send Multi-effects
- DJ FX
- Wavetable Synthesis
- A word about authenticity