- Filter page
- C2EF
8. C2EF Filter to effects
Using the C2EF parameter, the filter cut-off can be made to influence the effect sends to reverb and delay 1.
This allows for the quintessential intimate -> wide tension buildups found in many Trance tracks, by simply opening up the filter.
You may also be interested in...
- Upgrading from 1.0 (under Introducing firmware 2.0)
Mic/Line-level selection in sampler no longer requires write + play to be held (e.g. just turn value knob).
- 5. P.2.Pn Pitch to Pan (under Panning page)
Use note pitch as in input for placing voices in the stereo field.
- Woovebox compressor implementation (under Compressor and limiter)
This gives the Woovebox compressor a slightly smoother, more analog sound/behavior.
- Lo-fi & vintage analog and digital emulation (under Guides, tutorials and docs)
Here too, the sounds your Woovebox produces can be made to - just like the vintage analog drum computers - never be 100% the same on every trigger.
- Conditional triggering and modification (under Guides, tutorials and docs)
'do'; specifies the modification that should be made if the condition is satisfied.