- Guides, tutorials and docs
- Learning the Woovebox
- The very basics
- Quick start guide and video
- Tempo and BPM
- Tracks
- Patterns
- Live pattern recording
- Conditional triggering and modification
- Chords
- Arpeggios
- Scales and modes
- Genres
- Patches and Presets
- Sound design
- Paraphonic parts
- Multi-instrument mode
- Risers, fallers, sweeps & ear candy
- Live mode
- Song mode
- Full song writing
- Sampler & vocoder
- Sidechaining, gating, ducking and compression
- Mastering
- Lo-fi & vintage analog and digital emulation
- Randomization
- Hall effect sensor playing
- Advanced techniques
- Undo
- Boot modes
- MIDI, Sync and connecting other gear
- Remote control expander mode
- Wireless MIDI
- Battery and charging
- Hardware quirks and limitations
- Understanding DSP load
- Looking after your Woovebox
- Firmware updates
- Boot modes
- Boosted screen brightness / version
5/Ki Boosted screen brightness / LED test / firmware version
By keeping 5/ki pressed while turning the device on, screen and LED brightness can be temporarily increased from its default brightness. This may be useful if the default brightness is insufficient (for example in sunny outdoor scenarios). Turn the value knob to change the brightness. Press the value knob to continue the boot sequence (which should normally amount to a 1-2 second delay before dropping into Song mode). The device will display the firmware version it is running, until the boot sequence is complete.
You may also be interested in...
- Rezzonator: "Sequencer Page Tutorial" (under Video resources, tutorials and reviews)
- Workflow and Song Mode (under The very basics)
Generally, a workflow will look like; Select a song to work on.
- Guides, tutorials and docs (under Support, guides & tutorials)
Get to know your Woovebox and music production, from beginner to expert level.
- Tempo and BPM (under Guides, tutorials and docs)
This makes your songs sound like well-planned, evolving pieces of music.
- Turning off Wooveconnect CC messages (under MIDI, Sync and connecting other gear)
Device mirroring is off by default, if the device was not booted up with BLE enabled.
- Guides, tutorials and docs
- Learning the Woovebox
- The very basics
- Quick start guide and video
- Tempo and BPM
- Tracks
- Patterns
- Live pattern recording
- Conditional triggering and modification
- Chords
- Arpeggios
- Scales and modes
- Genres
- Patches and Presets
- Sound design
- Paraphonic parts
- Multi-instrument mode
- Risers, fallers, sweeps & ear candy
- Live mode
- Song mode
- Full song writing
- Sampler & vocoder
- Sidechaining, gating, ducking and compression
- Mastering
- Lo-fi & vintage analog and digital emulation
- Randomization
- Hall effect sensor playing
- Advanced techniques
- Undo
- Boot modes
- MIDI, Sync and connecting other gear
- Remote control expander mode
- Wireless MIDI
- Battery and charging
- Hardware quirks and limitations
- Understanding DSP load
- Looking after your Woovebox
- Firmware updates